112 lines
3.0 KiB
C
112 lines
3.0 KiB
C
/**
|
|
* Lab 3
|
|
* To develop a simple stopwatch that measures time intervals between
|
|
* button presses.
|
|
*
|
|
* On pressing the START pseudo-button (GP15),
|
|
* the stopwatch will begin,
|
|
* and the elapsed time will be displayed every second on
|
|
* the Serial Monitor (or equivalent).
|
|
*
|
|
* Releasing the START pseudo-button will stop the timer and
|
|
* reset the elapsed time to zero.
|
|
*
|
|
* The START pseudo-button must incorporate a debouncing algorithm.
|
|
*
|
|
*/
|
|
|
|
#include <stdio.h>
|
|
#include "pico/stdlib.h"
|
|
#include "hardware/gpio.h"
|
|
|
|
#define PSEUDO_BTN 15 // GPIO 15 is the pseudo-button
|
|
#define DELAY_US 1000000 // 1-second delay for repeating timer
|
|
#define DEBOUNCE_MS 200 // Debounce delay
|
|
|
|
unsigned long long time = 0; // Elapsed time
|
|
struct repeating_timer timer; // Repeating timer
|
|
|
|
/**
|
|
* Callback function for repeating timer
|
|
* This function will print the elapsed time every second as required by the
|
|
* lab specification.
|
|
* @param t The timer that triggered the callback
|
|
* @return True to keep the timer running, false to stop it
|
|
*/
|
|
bool repeating_timer_callback (struct repeating_timer *t) {
|
|
// Print elapsed time every second
|
|
printf("Elapsed Time: %llus\n",
|
|
(time_us_64() - time) / 1000000);
|
|
return true;
|
|
}
|
|
|
|
/**
|
|
* Interrupt callback function for pseudo-button (pull-up)
|
|
* This function will start the timer on button press (falling edge)
|
|
* and stop the timer on button release. (rising edge)
|
|
* @param gpio The GPIO pin that triggered the interrupt
|
|
* @param events The type of interrupt that triggered the callback
|
|
*/
|
|
void gpio_callback (uint gpio, uint32_t events) {
|
|
// Start timer on button press
|
|
if (gpio == PSEUDO_BTN && events == GPIO_IRQ_EDGE_FALL)
|
|
{
|
|
time = time_us_64();
|
|
printf("Timer Started at %llu\n", time);
|
|
|
|
add_repeating_timer_us(
|
|
DELAY_US,
|
|
repeating_timer_callback,
|
|
NULL,
|
|
&timer
|
|
);
|
|
}
|
|
// Stop timer on button release
|
|
else
|
|
{
|
|
if (gpio == PSEUDO_BTN && events == GPIO_IRQ_EDGE_RISE)
|
|
{
|
|
printf("Timer Stopped at %llu\n", time_us_64());
|
|
cancel_repeating_timer(&timer);
|
|
|
|
// Print elapsed time and reset
|
|
printf("Final Elapsed Time: %llus\n",
|
|
(time_us_64() - time) / 1000000);
|
|
|
|
time = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Initialize the pseudo-button (pull-up)
|
|
* The pseudo-button is connected to GPIO 15 and is configured as an input
|
|
* with a pull-up resistor.
|
|
* The interrupt is configured to trigger on both rising and falling edges.
|
|
*/
|
|
static void btn_init () {
|
|
gpio_init(PSEUDO_BTN);
|
|
gpio_set_dir(PSEUDO_BTN, GPIO_IN);
|
|
gpio_set_pulls(PSEUDO_BTN, true, false);
|
|
|
|
gpio_set_irq_enabled_with_callback(
|
|
PSEUDO_BTN,
|
|
GPIO_IRQ_EDGE_RISE | GPIO_IRQ_EDGE_FALL,
|
|
true,
|
|
&gpio_callback
|
|
);
|
|
}
|
|
|
|
int main () {
|
|
stdio_init_all();
|
|
btn_init();
|
|
|
|
while (true)
|
|
{
|
|
tight_loop_contents();
|
|
// Debounce
|
|
sleep_ms(DEBOUNCE_MS);
|
|
}
|
|
|
|
}
|